Average Rating:

.

Allcam PLB104L Universal 40-70" LCD/PLASMA TV Wall Mount Bracket Slim up to VESA 800x400

from: Allcam


This bracket is very well made; it is solid and exactly as described. I used it to fit Panasonic TH42PX70 model on a stud wall without any problems. It is very slim, just as described; the plasma only sticks out by just over an inch. It came with all the fittings and screws. I received the bracket within 3 days of ordering. As per others I agree that it would be difficult to track wires over the bottom bar, as it is. However, a little DIY would sort the problem. By cutting off about two inches of the lug on the bottom bar with a hacksaw would solve the problem. This would leave the flat bit of the bar intact thus still providing the required support. I don't think this would make the bracket any weaker as it is solid.

Average Rating:

.

PLB109S 26-37" LCD TV Wall Mount Bracket Pull-Out Swivel & Tilt Black

from: Allcam


This bracket is very well made; it is solid and exactly as described. I used it to fit Panasonic TH42PX70 model on a stud wall without any problems. It is very slim, just as described; the plasma only sticks out by just over an inch. It came with all the fittings and screws. I received the bracket within 3 days of ordering. As per others I agree that it would be difficult to track wires over the bottom bar, as it is. However, a little DIY would sort the problem. By cutting off about two inches of the lug on the bottom bar with a hacksaw would solve the problem. This would leave the flat bit of the bar intact thus still providing the required support. I don't think this would make the bracket any weaker as it is solid.

Average Rating:

.

Silicone Skin/Case+Screen Protector for iPod Video 30GB Yellow

from: Allcam


This bracket is very well made; it is solid and exactly as described. I used it to fit Panasonic TH42PX70 model on a stud wall without any problems. It is very slim, just as described; the plasma only sticks out by just over an inch. It came with all the fittings and screws. I received the bracket within 3 days of ordering. As per others I agree that it would be difficult to track wires over the bottom bar, as it is. However, a little DIY would sort the problem. By cutting off about two inches of the lug on the bottom bar with a hacksaw would solve the problem. This would leave the flat bit of the bar intact thus still providing the required support. I don't think this would make the bracket any weaker as it is solid.

Average Rating:

.

PLB105XL Extra Large (>50") LCD/Plasma TV Wall Mount Bracket w/ Security Lock

from: Allcam


This bracket is very well made; it is solid and exactly as described. I used it to fit Panasonic TH42PX70 model on a stud wall without any problems. It is very slim, just as described; the plasma only sticks out by just over an inch. It came with all the fittings and screws. I received the bracket within 3 days of ordering. As per others I agree that it would be difficult to track wires over the bottom bar, as it is. However, a little DIY would sort the problem. By cutting off about two inches of the lug on the bottom bar with a hacksaw would solve the problem. This would leave the flat bit of the bar intact thus still providing the required support. I don't think this would make the bracket any weaker as it is solid.

Average Rating:

.

iPod Nano Armband in Blue for Apple iPod Nano III/ 3rd Generation

from: Allcam


This bracket is very well made; it is solid and exactly as described. I used it to fit Panasonic TH42PX70 model on a stud wall without any problems. It is very slim, just as described; the plasma only sticks out by just over an inch. It came with all the fittings and screws. I received the bracket within 3 days of ordering. As per others I agree that it would be difficult to track wires over the bottom bar, as it is. However, a little DIY would sort the problem. By cutting off about two inches of the lug on the bottom bar with a hacksaw would solve the problem. This would leave the flat bit of the bar intact thus still providing the required support. I don't think this would make the bracket any weaker as it is solid.

Average Rating:

.

Allcam MB-D80 Battery Grip for Nikon D80 with Builtin Rechargeable Lithium Battery/Charger & Shutter

from: Allcam


This bracket is very well made; it is solid and exactly as described. I used it to fit Panasonic TH42PX70 model on a stud wall without any problems. It is very slim, just as described; the plasma only sticks out by just over an inch. It came with all the fittings and screws. I received the bracket within 3 days of ordering. As per others I agree that it would be difficult to track wires over the bottom bar, as it is. However, a little DIY would sort the problem. By cutting off about two inches of the lug on the bottom bar with a hacksaw would solve the problem. This would leave the flat bit of the bar intact thus still providing the required support. I don't think this would make the bracket any weaker as it is solid.

Average Rating:

.

Auto-switching 110-240V AC to 12V 2A DC mains adapter for Kodak Digital Photo Frame

from: Allcam


This bracket is very well made; it is solid and exactly as described. I used it to fit Panasonic TH42PX70 model on a stud wall without any problems. It is very slim, just as described; the plasma only sticks out by just over an inch. It came with all the fittings and screws. I received the bracket within 3 days of ordering. As per others I agree that it would be difficult to track wires over the bottom bar, as it is. However, a little DIY would sort the problem. By cutting off about two inches of the lug on the bottom bar with a hacksaw would solve the problem. This would leave the flat bit of the bar intact thus still providing the required support. I don't think this would make the bracket any weaker as it is solid.

Average Rating:

.

Allcam MDM07 Multi Screen Desk Mount Bracket: Four LCD Monitors/TVs on one desktop

from: Allcam


This bracket is very well made; it is solid and exactly as described. I used it to fit Panasonic TH42PX70 model on a stud wall without any problems. It is very slim, just as described; the plasma only sticks out by just over an inch. It came with all the fittings and screws. I received the bracket within 3 days of ordering. As per others I agree that it would be difficult to track wires over the bottom bar, as it is. However, a little DIY would sort the problem. By cutting off about two inches of the lug on the bottom bar with a hacksaw would solve the problem. This would leave the flat bit of the bar intact thus still providing the required support. I don't think this would make the bracket any weaker as it is solid.

Average Rating:

.

DCPLB102M Ceiling Mount Dual Brackets for Two 32-55 inch LCD/PlasmaTVs Tilt 20° 360° Motion

from: Allcam


This bracket is very well made; it is solid and exactly as described. I used it to fit Panasonic TH42PX70 model on a stud wall without any problems. It is very slim, just as described; the plasma only sticks out by just over an inch. It came with all the fittings and screws. I received the bracket within 3 days of ordering. As per others I agree that it would be difficult to track wires over the bottom bar, as it is. However, a little DIY would sort the problem. By cutting off about two inches of the lug on the bottom bar with a hacksaw would solve the problem. This would leave the flat bit of the bar intact thus still providing the required support. I don't think this would make the bracket any weaker as it is solid.

Average Rating:

.

LCD502S LCD Monitor Bracket Desk Mount Table Mounting Telescopic, Tilt, & Swivel

from: Allcam


The photo showing the mount with a monitor must be showing some 15" display, because when the item arrived I was pretty surprised how small it is. I have 24" monitor and it pushes this mount to its limits. It droops, but I could set it up so that the screen stays vertically. Still I can't move it as freely as I hoped, because of this drooping. Anyway, I say it is good enough for 32 quid.